一、仿真稻草-安装方法

由屋檐从下向上铺，与常规铺瓦的方法一样。每一片横向重叠3mm ,重叠时注意不要太多，否则会超出预算量。沿着屋檐的茅草建议草线留长点重叠多点，突出飘垂厚重效果。

安装步骤：第一层：沿着参照线将茅草瓦的实瓦部分沿着屋檐边钉实。第二层：比第一层向上退1-2 cm.第三层，第四层照比重叠钉实。第五层以上向上退约5-6cm(约是退实瓦部分的宽度)

二、整理整个屋顶安装完之后，可将茅草瓦的弯度适当压一压，挑一挑，使之顺坦自然。

三.温馨提示

1.仿真茅草瓦虽有一定的防雨水作用(重叠较厚时)，但挡雨水并不是它的主要功能，建议安装前屋顶做好专业的防水层。

2.安装时不要过于紧凑，也不要过于稀松，以免影响整体效果。

3.整体效果：从下往上看，不要看到防雨布，效果最佳。

4.安装完工禁止踩踏，用手折。

5.安装之后不用作防火和防虫处理，没有维修和更换工作量【仿真稻草】

First, simulation of straw - installation method

From the roof to the top, the roof is the same as the conventional tile laying method. Each slice should be overlapped with 3mm. If you overlap, do not pay too much attention, otherwise it will exceed the budget. The grass line along the eaves suggests that the grass line should be longer and overlapped to highlight the thick and heavy effect.

Installation steps: Level 1: along the reference line, the solid tile part of thatched tile will be staple along the eaves. The second level: 1-2 cm. third layers above the first level and fourth layers of overlap. The fifth level above is about 5-6cm upward (about the width of the retile tile).

2. After finishing the installation of the whole roof, the curvature of the thatched tiles can be properly pressed and selected to make it smooth and natural.

Three. Warm reminder

1. Simulated thatch tiles have a certain role in rainproof (when overlapping is thicker), but rainproof is not its main function, it is recommended to do a good job of professional waterproof roof before installation.

2. installation should not be too tight and not too loose, so as not to affect the overall effect.

3. overall effect: from the bottom up, do not see rainproof cloth, the best effect.

4. no stampede and folding should be done after installation.

5. after installation, there is no need for fire protection and pest control. There is no maintenance and replacement workload.